Grooming Guides · 8 min read · November 2026
Best Dog Brush for Your Dog's Coat Type: Slicker, Pin, Rake or Rubber? (India Guide)
The wrong brush can leave tangles behind, scratch the skin or do nothing at all. Match the brush to the coat with this guide to slicker brushes, pin brushes, undercoat rakes, combs and rubber curry brushes, and how to use each one.
Walk into any pet shop in Pune and you will find a wall of brushes that all look vaguely similar. Most owners pick the cheapest or the prettiest one, use it for a week and decide that brushing does not work on their dog. The brush was never the problem. The mismatch between the brush and the coat was.
This guide explains what each type of brush and comb actually does, which coats it suits, and how to use it without hurting your dog. If you are not sure what coat your dog has, start with our guide to dog coat types and how to groom each.
The quick answer
- Short, smooth coat (Beagle, Pug, Boxer, most Indies): rubber curry brush or grooming glove, plus a soft bristle brush
- Double coat that sheds heavily (Labrador, Golden Retriever, German Shepherd, Husky): undercoat rake, then a slicker brush, then a comb
- Long, silky coat (Shih Tzu, Maltese, Lhasa Apso): pin brush or slicker brush, and a steel comb to check
- Curly or woolly coat (Poodle, Doodles, Bichon): slicker brush and a steel comb, used to the skin
- Wiry coat (Terriers, Schnauzers): slicker brush and a comb; the coat may need hand-stripping by a professional
- Any coat: a fine-toothed steel comb is the tool that tells you whether the job is actually finished
Brush by brush
Slicker brush
A flat head covered in fine, bent wire pins. It is the workhorse for medium to long and curly coats because it reaches into the coat and pulls out loose hair and small tangles. It is not a brush for pressing hard. Use light, short strokes and lift the pins away from the skin at the end of each stroke. On a dog with thin skin or a short coat, a slicker can scratch, and it does very little for a smooth coat anyway.
Pin brush
Looks like a human hairbrush, with widely spaced metal pins, usually tipped with small balls. It is gentler than a slicker and suits long, silky coats, as well as for finishing and fluffing after a bath. It will not get through a thick undercoat or a real tangle.
Bristle brush
Natural or firm synthetic bristles. For short, smooth coats this removes dust, loose hair and distributes natural oils, giving a shine. For long coats it does little.
Rubber curry brush or grooming glove
Soft rubber nubs that loosen dead hair and massage the skin. Excellent for short-coated dogs and a good first brush for a dog that dislikes being groomed. It can also be used with shampoo in the bath to work the lather in and lift loose hair. Many dogs enjoy it. It will not touch a dense undercoat.
Undercoat rake
A comb with a row of widely spaced, rotating or fixed teeth, made to pull out dead undercoat from double-coated breeds without cutting the top layer. This is the tool behind a proper deshedding session; see our deshedding treatment. Use it with steady, gentle strokes in the direction of hair growth, never on a matted coat, and never on a wet coat that is tangled. Most dogs only need it during heavy shedding, and weekly use at most.
Deshedding blade tool
A comb with a fine metal edge that cuts through the undercoat and pulls it out. It can remove a lot of hair quickly, which is why people love it, and also why it is easy to overdo. Using it too often or pressing hard can damage the protective outer coat and irritate the skin. Keep sessions short, avoid the same patch of skin repeatedly, and do not use it on single-coated dogs, curly coats or any dog whose skin looks red.
Steel comb
Metal teeth, either fine, coarse or both. This is the finishing tool. Run it through the coat to the skin after brushing: if it catches, there is still a tangle hiding. A comb with both wide and fine teeth covers most dogs.
Dematting comb or mat splitter
A comb with blades or serrated teeth, designed to cut through a mat so it can be brushed out in pieces. These can slice skin if used badly, and they are painful on a tight mat. Use only on small, loose mats, work with the hair rather than against it, hold the base of the hair against the skin to avoid pulling, and stop if your dog is uncomfortable. For anything that is tight against the skin, book a professional; see dematting and coat rescue and our post on why coats keep matting.
Flea comb
A very fine-toothed comb for catching fleas and flea dirt. Useful for checking, not for general brushing. See our flea guide.
How to brush properly, whatever the brush
- Brush on a dry coat. Wet tangles tighten and are far harder to remove
- Work in sections: lift the top layer, brush the layer beneath, then let the layer down and repeat. This is often called line brushing, and it stops you from only brushing the surface
- Start with the legs, belly, armpits, behind the ears and the tail base, which tangle first
- Hold the hair near the skin with one hand while you brush the ends, so you are not tugging
- Finish with a comb to check
- Keep sessions short and positive, with treats
Our guide to what to do between grooming sessions covers how often to brush for each coat.
Common mistakes
- Using a slicker brush hard against the skin and causing brush burn
- Brushing only the top of a thick coat while the undercoat tangles
- Using a deshedding tool daily
- Brushing a dog that is matted tight to the skin instead of seeing a groomer
- Choosing a brush with long, sharp pins for a dog with thin skin
- Never cleaning the brush. Pull the hair out after every session, and wash brushes in mild soap and water now and then
- Skipping the comb, so tangles are only found when they have become mats
What to look for when buying
- Comfortable handle you can hold for ten minutes without strain
- Pins that are smooth and rounded at the tips, with no rough or bent edges
- A head size that suits your dog: small heads for toy breeds, larger for big dogs
- A self-cleaning button on slicker brushes is handy but not essential
- Avoid anything with a plastic comb that snags. Steel combs last for years
You do not need all of them. For most dogs, two or three tools are plenty: one brush that suits the coat, a steel comb, and, for double-coated breeds, an undercoat rake.
When to leave it to a groomer
If your dog has tight mats, hates being brushed, or has skin that looks sore, no brush will fix that. A groomer can safely remove the problem and show you what to use at home; see our guide on grooming your dog at home: tools, mistakes and when to call a pro. Sniffy groomers visit homes across Baner, Kothrud, Hadapsar, Wakad and the rest of Pune, and are happy to tell you which brush your dog needs.